User's Manual
Table Of Contents
- GeoExplorer® 6000 series
- Legal Notices
- Safety Information
- Contents
- Introduction
- Getting Started
- Using the Windows Mobile Operating System
- Connecting to an Office Computer
- Using the GNSS Receiver
- Supported GNSS field software
- Configuring the GNSS field software to connect to the receiver
- Using the GNSS field software
- Improving GNSS productivity using Floodlight satellite shadow reduction technology
- Ensuring the accuracy of your GNSS data
- Activating the Floodlight technology and the NMEA output options
- Differential GNSS explained
- Outputting NMEA data to external equipment
- Configuring NMEA output
- Getting Connected
- Wireless connection information
- Connecting to a cellular network from the modem
- Connecting to a Wi-Fi access point
- Connecting to a Bluetooth-enabled device
- Connecting to a Bluetooth device as a client
- Providing Bluetooth services as a host
- Setting up a Bluetooth connection
- Connecting to a Bluetooth-enabled phone for Internet access or real-time corrections (including VRS networks)
- Connecting to the Internet through a Bluetooth-enabled phone using the Bluetooth PAN profile
- Connecting to a Bluetooth-enabled serial device
- Connecting to an office computer using Bluetooth wireless technology
- Outputting GNSS data to other devices using Bluetooth wireless technology
- Enabling other devices to transfer files using Bluetooth wireless technology
- Beaming files to or from another device
- Accessing a corporate network through your Internet connection
- Connecting to other devices using the USB to serial converter
- Using the Camera
- Troubleshooting
7 Using the Camera
114 GeoExplorer 6000 Series User Guide
Parts of the camera
Figure 7.1 GeoExplorer 6000 series camera controls
Use the Camera button to:
• Start the camera application
• Lock focus (press and hold the button)
• Capture photos (release the button)
• Start and stop recording a video (in Video mode, press the button)
Starting the camera application and capturing photos or video
To start the camera, do one of the following:
1. Press the
Camera button in the center of the keypad.
2. Tap / Pictures & Videos / Camera.
When the camera application is started, it is by default in Still (photo) mode.
3. Do one of the following:
a. To capture a photo:
– Hold the handheld steady. Use the preview window to frame the subject in
the centre of the frame.
– To focus, press the Camera button down and hold. Focus and exposure are
set and locked while the camera button is held in this position.
– To capture the photo, release the Camera button and hold the camera
steady until the review photo is shown.
b. To capture a video:
– Tap the menu Menu button and then select Video.
Camera button
Camera Lens