User's Manual Part 3

GeoExplorer 2008 Series User Guide 83

Getting Connected 6

If the access point icon or the notification does not appear, use the Wireless

Manager to turn off and then turn back on the wireless LAN radio. When the

wireless LAN radio is turned on, any networks or access points within range are

detected and the icon and notification appear.

3. Tap the access point icon on the title bar or tap

Notification on the left softkey.

A popup message shows the available networks.

4. Select the network you want to connect to and then tap

OK on the left softkey.

5. Select The Internet (or work via a VPN) or Work and then tap

Connect on the left

softkey.

6. If a Network Log On screen appears, enter your user name, password, and

domain information and then tap

OK on the left softkey.

When the handheld is connected to the network or access point, the wireless

LAN connected icon appears in the title bar.

7. Start using the program you want to use, for example Windows Explorer Mobile

or Internet Explorer.

Note – To disconnect from the network or an access point at any time, turn off the

handheld’s wireless radio. To do this, tap the wireless LAN connected icon in the title

bar, select Wireless Manager and then tap the

Wi-Fi button.

Tip – To delete a wireless LAN connection, tap and hold the connection in the

Wireless tab of the Network Cards screen and then select Delete.