User's Manual Part 1

Table Of Contents

GeoExplorer 2008 Series User Guide 33

Getting Started 2

Fitting the handstrap

The handstrap and screws are provided in the box with the handheld. To fit the

handstrap:

1. Align the straight bracket with the slots

below the Microsoft Windows Mobile logo.

Insert the bracket by pressing it down and

into the slots.

2. Insert the first screw and then use a coin or

screwdriver to tighten the screw.

3. Align the curved bracket with the slots

above the communication swipes at the

base of the handheld. Insert the bracket by

pressing it down and into the slots.

4. Insert the second screw and then use a coin

or screwdriver to tighten the screw.