User's Manual Part 1

GeoExplorer 2008 Series User Guide 19
Introduction 1
Storage
If you are not going to use the handheld for three months or more, Trimble
recommends that you do not leave the handheld in Suspend mode (see page 28).
Instead, partially charge the battery and then turn off the handheld.
To prepare the GeoExplorer 2008 series handheld for storage:
1. Transfer any data that you need to an office computer.
2. Charge the battery to approximately 30% and then remove the handheld from
the support module.
3. Press the
Power key for one second until the Power menu appears and then tap
the
Shutdown button.
4. Store the handheld at room temperature.
To use the GeoExplorer 2008 series handheld after storage:
1. Press the
Power key to turn on the handheld.
2. Recharge the internal battery using the support module (see Charging the
battery, page 25).
Technical assistance
Technical support
Go to the GeoExplorer 2008 series handheld technical support page
(www.trimble.com/geoxh_ts.asp, www.trimble.com/geoxm_ts.asp, or
www.trimble.com/geoxt_ts.asp) on the Trimble website for the latest support
information about the software, including:
• FAQs
• support notes detailing support issues
• documentation
• the latest files available for download
Additional help
If you still cannot find the information that you need, contact your Trimble reseller.