User's Manual

802.11g Wireless LAN+BT SiP combo Module V2.2
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
Preliminary release for evaluation, Subject to be changed without Notice
Vibration
Operating Frequency sweep from 3-150-3 Hz with a constant 0.25 G
input
Non-Operational Frequency sweep from 3-150-3 Hz with a constant 0.5 G input
Shock
Operational 25 G peak within 3.75 msec in normal base position
Non-Operational 65 G peak in 3.75 msec in normal base position.
30 G within 8 msec square or trapezoidal shock in + and -
direction along the 3 axis. (Total 6 shocks)
Note: Above tests are executed without packaging material.
5. COMPATIBILITY AND INTEROPERABILITY
5.1. WI-FI LOGO
The product needs to be verified with Wi-Fi certification base on CF form factor to prove the
hardware compatibility. For the other specific application, Wi-Fi certification is dependent on
the capability and application of the host system.
5.2. WHQL COMPLIANCE
Not required for WM-BG-MR -01 module
6. CONFIGURABILITY
No user configuration needed. The CIS and MAC Address will be loaded during production of
the WM-BG-MR-01 module.
7. SECURITY
The WM-BG-MR-01 module supports WEP64/128,WPA , AES-CCM which including TKIP (full
version TKIP SSN /WPA) . Refer to Marvell Libertas solution.
8. OPERATING SYSTEM COMPATIBILITY
Drivers are supported for the following OS:
• Windows CE 3.0 /.NET , Win CE 5.0 ( 2005)
• Linux.
• Pocket PC 2003.2004
9. LEGAL, REGULATORY & OTHER TECHNICAL CONSTRAINTS
The WM-BG-MR-01 module is pre-tested to ensure that all requirements met as set forth in the
following sections.