User's Manual
Table Of Contents
- GeoExplorer® 2005 Series Getting Started Guide
- Legal Notices
- Safety Information
- About this Manual
- System Components
- Getting Started
- Windows Mobile Basics
- ActiveSync Connections
- Installing Software
- Using GPS
- Power
- Memory
- Internet and Network Connections
- Using the Bluetooth Radio
- Using the WLAN Radio
- Using Cabled Ethernet
- Using the Optional Serial Clip
- Personalizing your Handheld
- Use and Care
- Troubleshooting
- Index
GeoExplorer 2005 Series Getting Started Guide 77
Use and Care 17
When using the GeoExplorer 2005 series handheld:
• Keep the outer surface free of dirt and dust.
• Keep the communication swipes, the external antenna port,
and the SD card slot free of dirt and dust (see SD memory
cards, page 40).
• Protect the touch screen from pressure and sharp or abrasive
objects. Trimble recommends applying a screen protector to
the device.
Servicing
If the handheld requires servicing, contact your local dealer.
Cleaning
To clean the handheld, wipe it with a clean dry cloth. Do not
immerse the handheld in water.
Storage
If you are not going to use the handheld for three months or more,
Trimble recommends that you turn the handheld off instead of
leaving it in Suspend mode, and store in a cool place.
To prepare the GeoExplorer 2005 series handheld for storage:
1. Transfer any data that you need to a desktop computer.
2. Hold down the
Power button until the handheld turns off
(about 15 seconds).
To use the GeoExplorer 2005 series handheld after storage:
1. Press the Power button to turn on the handheld.
2. Recharge the internal battery using the support module
(see Charging the internal Lithium-ion battery, page 35).