User's Manual
Table Of Contents
- GeoExplorer® 2005 Series Getting Started Guide
- Legal Notices
- Safety Information
- About this Manual
- System Components
- Getting Started
- Windows Mobile Basics
- ActiveSync Connections
- Installing Software
- Using GPS
- Power
- Memory
- Internet and Network Connections
- Using the Bluetooth Radio
- Using the WLAN Radio
- Using Cabled Ethernet
- Using the Optional Serial Clip
- Personalizing your Handheld
- Use and Care
- Troubleshooting
- Index
Personalizing your Handheld
GeoExplorer 2005 Series Getting Started Guide 73
Sounds and Notifications
Use the Sounds and Notifications control to set preferences for the
speaker volume and system sounds. To open the Sounds and
Notifications control:
• Tap / Settings / Personal / Sounds and Notifications.
To turn sounds on or off:
1. Tap the Sounds tab.
2. Select or clear the check boxes to
enable or disable categories of
sounds.
3. If you select the Screen taps or
Hardware buttons check boxes, select
the Soft or Loud option to control the
volume of the sounds.
4. Tap OK.
You can use predefined schemes to
customize sounds, or you can create
your own sound schemes.
To specify a sound scheme:
1. Tap the Notifications tab.
2. From the Select an event drop-down
list, select an event.
3. Select from the available options the
type of notification you want to
receive for the selected event.
4. Tap
OK.