User's Manual

Using the Bluetooth Radio
56 GeoExplorer 2005 Series Getting Started Guide
3. Select Add a new modem
connection.
4. Enter the name for the connection
and select Bluetooth for the
modem type. Tap
Next.
5. If the device has not already been
bonded, select New Partnership to
bond with the device.
6. Select the mobile phone from the
Select a Bluetooth Device list and
then enter a passkey.
7. Select the Dialup Networking
service (if it is not already selected) and tap
Finish.
8. Tap Connections / Manage existing connections then tap and hold
the connection you just created and then select Connect.
9. The phone should now dial the configured number.
To set up a Bluetooth direct dial connection to a VRS network:
1. Create a bond between the handheld and the mobile phone you
intend to connect to (see Bonding with a Bluetooth device,
page 54).
2. On the handheld, tap
/ Settings /
Connections / Bluetooth and then
tap the DUN (Dial-Up Networking)
tab.
3. On the DUN tab, click and hold the
name of the mobile phone that you
have bonded with and then select
Activate.
A green symbol appears beside the
name of the mobile phone.