User's Manual

Using the Bluetooth Radio
GeoExplorer 2005 Series Getting Started Guide 55
3. In the Devices list, tap New
Partnership. The handheld searches
for other Bluetooth devices and
displays them in the list.
4. Tap the name of the device you
want to bond with and then tap
Next.
5. In the Passkey field, enter a passkey
of between 1 and 16 characters and
tap
Next.
6. Enter the same PIN on the other
device.
7. In the Display Name field, change the name of the device if
required.
8. Select the services you want to use with this device. For more
information, see the table on page 58.
9. Tap
Finish.
B
Tip – You only need to create a bond once between two devices.
Setting up Bluetooth connections
For e-mail and Internet access, you can use Bluetooth wireless
technology to connect to a Bluetooth-enabled mobile phone or
modem.
If the handheld is running TerraSync software, you can use Bluetooth
wireless technology to connect the handheld to a VRS
™
(Virtual
Reference Station) network. A mobile phone provides the modem.
To set up a Bluetooth dial-up connection to the Internet:
1. On the mobile phone, enable Bluetooth as required and make the
phone Discoverable (see page 54).
2. On the handheld, tap / Settings / Connections / Connections.