User's Manual
Table Of Contents
- GeoExplorer® 2005 Series Getting Started Guide
- Legal Notices
- Safety Information
- About this Manual
- System Components
- Getting Started
- Windows Mobile Basics
- ActiveSync Connections
- Installing Software
- Using GPS
- Power
- Memory
- Internet and Network Connections
- Using the Bluetooth Radio
- Using the WLAN Radio
- Using Cabled Ethernet
- Using the Optional Serial Clip
- Personalizing your Handheld
- Use and Care
- Troubleshooting
- Index
Memory
42 GeoExplorer 2005 Series Getting Started Guide
The card pops out.
3. Remove the card and, if you want to, insert a new SD card.
4. Reattach the SD door, insert both screws and tighten.
5. Replace the stylus cap.
Backing up data
Documents and program files that are stored on the flash disk are not
affected by power loss or resetting. However, you can still lose data if
you accidentally delete or overwrite it.
C
CAUTION – Windows Mobile Version 5.0 software does not include a
Recycle Bin. When you delete files from the flash disk, they are deleted
permanently.
To protect your data, Trimble recommends that you regularly copy
important data to your office computer or to an SD memory card.
To back up files:
1. Connect the handheld to the computer using ActiveSync
technology.
2. In ActiveSync, click
Explore. Windows Explorer opens, showing
the contents of the handheld.
3. Browse to the location of the files that you want to back up.
4. Select the files that you want to back up, and then copy them to
the computer or to your SD memory card.
To restore files from a backup on a computer:
1. Connect the handheld to the computer using ActiveSync
technology.
2. Copy files from the backup copy on the computer or your SD
memory card to the handheld, overwriting the existing files.