User's Manual

Installing Software
20 GeoExplorer 2005 Series Getting Started Guide
Installing ArcPad software
You can install version 6.0.3 of the ESRI ArcPad software on a
GeoExplorer 2005 series handheld. Detailed installation instructions
for ESRI ArcPad are provided in the ArcPad documentation.
Note – You must install the ArcPAD 6.0.3 QFE patch after installing the
software. This patch fixes display issues seen in Windows Mobile
software. For more information, visit http://support.esri.com/index.cfm,
select the Downloads tab and then select the Patches and Service Packs
link.
Installing the GPScorrect extension
You can install version 1.11 or later of the Trimble GPScorrect
extension for ESRI ArcPad software on a GeoExplorer 2005 series
handheld. Make sure you install version 6.0.3 of the ArcPad sofware
before you install the GPScorrect extension.
To install the GPScorrect extension, either insert the Trimble
GPScorrect Extension for ESRI ArcPad Software CD in the CD-ROM
drive of a computer and use the menus provided, or run the
downloaded setup file. Detailed installation instructions are provided
in the GPScorrect Extension Release Notes.
Using the GPS Analyst extension
You can also use the GeoExplorer 2005 series handheld with the
Trimble GPS Analyst
™
extension for ESRI ArcGIS software. Connect
the GeoExplorer handheld to a Tablet PC or laptop running version
1.20 or later of the GPS Analyst extension and use the handheld as
your GPS receiver. Run ArcMap software, and use the GPS Analyst
extension to collect GPS data.