User's Manual

Getting Started
GeoExplorer 2005 Series Getting Started Guide 9
Turn on and suspend
Press and release the Power button to turn on or to
suspend the handheld.
For more information, see Suspend mode, page 38.
Align the touch screen
The first time you turn on your handheld, you are prompted to align
the touch screen. Follow the on-screen instructions to align the touch
screen.
If at any time the touch screen does not respond properly to stylus
taps, realign it. To begin the alignment sequence, press the
Display
button and the
Start button at the same time and follow the
on-screen instructions.
Turn on the backlight
The touch screen is visible in all conditions,
including bright sunlight. Press the
Display
button to turn the backlight on or off.
To adjust the backlight, use the Backlight control
(see Backlight, page 75).
The
Display button overrides settings in the Backlight control. To
turn on the backlight again, use the
Display button.