User's Manual

Using the Bluetooth Radio
62 GeoExplorer 2005 Series Getting Started Guide
7. The Authentication check box is selected by default. When the
host connects to this service, the Enter PIN dialog appears. Enter a
PIN in this dialog and then enter the same PIN on the client.
Note – Authentication helps to ensure that your data remains secure.
However, if you enable authentication, only client devices that support
PIN entry will be able to connect to the service.
8. The Encryption check box is selected by default, so that data
transferred using this service will be encrypted.
9. Tap
Finish to return to the Serial Ports tab. The new host serial
port is listed in the Host Serial Ports list, with the assigned port
indicated.
Applications on the handheld can now
use the COM or BSP port that you
selected for this service. For example,
to provide NMEA messages from the
integrated GPS receiver to a Bluetooth
client, use the GPS Connector software
to redirect the NMEA output on COM2
to the virtual serial port or Bluetooth
port that you have assigned to this
service.
B
Tip – Trimble recommends that you establish the Bluetooth connection
before you supply data to a service.