User's Manual

Using the Bluetooth Radio
GeoExplorer 2005 Series Getting Started Guide 59
To set up a client serial port service:
1. Make sure that the host Bluetooth device is Discoverable.
2. Make the handheld Discoverable
(see page 54) and then in the
Bluetooth control, tap the Serial
Ports tab.
3. Add a new client serial port, or
change the settings for an existing
one.
– To change the settings for an
existing client serial port, tap
and hold the name of the serial
port in the Client Serial Ports list.
– To add a new client serial port,
tap New in the Client Serial Ports
list. The list immediately shows any bonded devices that have
a serial port profile exposed. The Searching icon appears, and
the handheld scans for any other Bluetooth devices that are
within range and that expose the serial port profile. Tap the
name of the serial port you want to set up and then tap
Next.
4. The Setup the Bluetooth device
dialog appears. The name of the
host device is in the Name field.
Edit the Name field if required.
5. From the Port list, select an
available COM or BSP port on the
handheld. The next available port is
selected as the default.
Note – If the application that will use
this service cannot recognize BSP ports,
select a COM port.