User's Manual

Using the Bluetooth Radio
GeoExplorer 2005 Series Getting Started Guide 53
www.trimble.com/support.shtml, click one of the GeoExplorer 2005
series links (GeoXH 2005 series, GeoXT 2005 series, or GeoXM 2005
series), click Downloads and then select the Bluetooth Activation
Manager.
Enabling Bluetooth wireless connections
The GeoExplorer 2005 series handheld is shipped with Bluetooth
wireless technology activated.
Use the Bluetooth control to turn on the integrated Bluetooth radio,
scan for and bond with other Bluetooth devices, and configure host
services on the GeoExplorer 2005 series handheld.
To open the Bluetooth control, tap / Settings / Connections /
Bluetooth.
Turning on the Bluetooth radio
To use the GeoExplorer 2005 series
handheld as a Bluetooth host or client,
you must turn on the Bluetooth radio.
To turn on the Bluetooth radio:
1. Tap / Settings /
Connections / Bluetooth.
2. In the Mode tab, select the Turn on
Bluetooth option. This enables the
integrated Bluetooth radio.
Note – If the integrated Bluetooth radio
is deactivated, the message
No
Bluetooth hardware
appears.
B
Tip – To conserve power, turn off the Bluetooth radio when it is not in
use.