User's Manual

Using the Bluetooth Radio
52 GeoExplorer 2005 Series Getting Started Guide
The following diagram shows the handheld connected to different
types of devices using Bluetooth. The arrows indicate the direction of
the flow of data from the host to the client device.
Deactivating the Bluetooth radio
The GeoExplorer 2005 series handheld is shipped with Bluetooth
wireless technology activated. To use the Bluetooth radio, you need
to turn it on (see Enabling Bluetooth wireless connections, page 53).
You may need to deactivate the Bluetooth radio in the handheld if the
country in which you are working does not approve the use of
Bluetooth wireless technology. If you are unsure about whether the
GeoExplorer 2005 series handheld’s Bluetooth radio is approved for
use in your country, check with your local Trimble Distributor.
Use the Bluetooth Activation Manager software to deactivate the
Bluetooth radio, or to reactivate the Bluetooth radio if it has been
deactivated.
The Bluetooth Activation Manager software runs on an office
computer. The latest copy of the software is available for download
from the Internet. To download the software, go to
host
client
host
host
host