User's Manual

Memory
GeoExplorer 2005 Series Getting Started Guide 43
Resetting the handheld
If the handheld stops responding to the stylus, or the screen goes
blank, you may need to reset it.
B
Tip – If the screen is blank, low contrast may be the cause. Press the
Display button to turn on the backlight.
To reset the GeoExplorer 2005 series handheld, hold down the Power
button for 5 seconds to perform a soft reset.
If that does not work, hold down the
Power button for 15 seconds to
perform a soft reset and turn off the handheld. Then press the
Power
button to turn it on again
Note – Files stored on the flash disk are not affected by a reset.