User's Manual
Table Of Contents
- GeoExplorer® 2005 Series Getting Started Guide
- Legal Notices
- Safety Information
- About this Manual
- System Components
- Getting Started
- Windows Mobile Basics
- ActiveSync Connections
- Installing Software
- Using GPS
- Power
- Memory
- Internet and Network Connections
- Using the Bluetooth Radio
- Using the WLAN Radio
- Using Cabled Ethernet
- Using the Optional Serial Clip
- Personalizing your Handheld
- Use and Care
- Troubleshooting
- Index
Power
GeoExplorer 2005 Series Getting Started Guide 37
Note – The GeoExplorer 2005 series handheld is not compatible with the
serial clip supplied with previous versions of the handheld. You must use
the gray serial clip (P/N 53550-00) provided with the GeoExplorer 2005
series handheld.
3. Connect the other end of the cable to the external power source.
Note – You must use the vehicle power adaptor (P/N 61235-00) or the
Lithium-ion battery supplied with the external power kit (P/N 57123-00)
provided with the GeoExplorer 2005 series handheld. These
components are not compatible with previous versions of the
GeoExplorer series handheld. Likewise, the GeoExplorer 2005 series
handheld is not compatible with the 12V vehicle power adaptor or the
12V lead acid camcorder battery supplied with the external power kit
used with previous versions of the handheld.
Recharging from an external power source
By default, the GeoExplorer 2005 series handheld recharges its
internal battery from any external power source that is connected.
Recharging the battery draws more power from the external source
than is used to power the handheld.
To use power from … connect this … to …
AC power source (mains power) AC power adaptor supplied
with the handheld
AC power outlet
external power kit battery adaptor cable from optional
external power kit
(P/N 57123-00)
Lithium-ion battery
provided as part of
external power kit
vehicle battery optional vehicle power
adaptor (P/N 61235-00)
vehicle’s cigarette
lighter socket