User's Manual
Table Of Contents
- GeoExplorer® 2005 Series Getting Started Guide
- Legal Notices
- Safety Information
- About this Manual
- System Components
- Getting Started
- Windows Mobile Basics
- ActiveSync Connections
- Installing Software
- Using GPS
- Power
- Memory
- Internet and Network Connections
- Using the Bluetooth Radio
- Using the WLAN Radio
- Using Cabled Ethernet
- Using the Optional Serial Clip
- Personalizing your Handheld
- Use and Care
- Troubleshooting
- Index
8 GeoExplorer 2005 Series Getting Started Guide
Getting Started 4
Follow the steps below to get started with the GeoExplorer 2005
series handheld. For information on using Windows Mobile
software, see Windows Mobile Basics, page 11.
Charge the battery
Before using the handheld for the first time, you must charge the
battery.
Connect one end of the AC adaptor cable to the support module and
the other to an AC power outlet. Put the handheld in the support
module as shown below.
Leave to charge for up to eight hours. For more information, see
Power, page 34.
To remove the handheld from the support module, press the release
button on the support module, then lift the bottom of the handheld
upward.