User's Manual
Table Of Contents
- GeoExplorer® 2005 Series Getting Started Guide
- Legal Notices
- Safety Information
- About this Manual
- System Components
- Getting Started
- Windows Mobile Basics
- ActiveSync Connections
- Installing Software
- Using GPS
- Power
- Memory
- Internet and Network Connections
- Using the Bluetooth Radio
- Using the WLAN Radio
- Using Cabled Ethernet
- Using the Optional Serial Clip
- Personalizing your Handheld
- Use and Care
- Troubleshooting
- Index
Safety Information
x GeoExplorer 2005 Series Getting Started Guide
AC adaptor safety
An international adaptor kit is provided with the GeoExplorer 2005
series handheld. To charge the handheld’s internal battery, use the
international adaptor kit connected to the support module
(see Power, page 34).
C
WARNING – To use AC adaptors safely:
- Use only the AC adaptor intended for the GeoExplorer 2005 series
handheld. Using any other AC adaptor can damage your product
and may void your warranty. Do not use the AC adaptor with any
other product.
- Make certain that the input voltage on the adaptor matches the
voltage and frequency in your location.
- Make certain that the adaptor has prongs compatible with your
outlets.
- AC adaptors are designed for indoor use only. Avoid using the AC
adaptor in wet outdoor areas.
- Unplug the AC adaptor from power when not in use.
- Do not short the output connector.
- There are no user-serviceable parts in this product.
- Should damage to the AC adaptor occur, replace it with a new Trimble
AC adaptor (P/N 61234-00).