User Manual
Table Of Contents
- Trimble R6, R7 GPS Receivers / Trimble R8 GNSS Receiver User Guide
- Legal notices
- Safety Information
- Contents
- Introduction
- Trimble R7 GPS Receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- Trimble R6 GPS R8 GNS Receivers
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Appendixes: Trimble R6/R7 GPS Receivers Trimble R8 GNSS Receiver
- NMEA-0183 Output
- RTCM Output
- Troubleshooting
- Index
CHAPTER
5
Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide 37
Configuration 5
In this chapter:
Q Configuring the receiver in real
Time
Q Configuring the receiver using
application files
Q Application files
The Trimble R7 GPS receiver has no controls for
changing settings. To configure the receiver, use
external software, such as GPS Configurator or
Trimble Survey Controller.
To configure the Trimble R7 GPS receiver, do one
of the following:
• Configure the receiver in real time
• Apply the settings in an application file
This chapter provides a brief overview of each of
these methods, and describes the contents and
use of application files.