User Manual
Table Of Contents
- Trimble R6, R7 GPS Receivers / Trimble R8 GNSS Receiver User Guide
- Legal notices
- Safety Information
- Contents
- Introduction
- Trimble R7 GPS Receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- Trimble R6 GPS R8 GNS Receivers
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Appendixes: Trimble R6/R7 GPS Receivers Trimble R8 GNSS Receiver
- NMEA-0183 Output
- RTCM Output
- Troubleshooting
- Index
Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide 95
General Operation 14
Trimble R6 GPS and R8 GNSS Receiver Operation
147.3 Firmware
A receiver’s firmware is the program inside the receiver that controls receiver
operations and hardware. You can upgrade the firmware for the receiver using the
WinFlash utility provided on the receiver CD.
For more information, see The WinFlash Utility, page 105.
C
WARNING – Upgrading the firmware deletes all application files on the receiver.