User's Manual
Table Of Contents
- USER GUIDE
- Legal Notices
- Safety Information
- Contents
- Introduction
- Features and Functions
- Batteries and Power
- Setup Guidelines
- Setting up the Receiver
- Configuring the Receiver Settings
- Using the SCS900 Site Controller software to configure the base station, the rover, and the radios
- Configuring the receiver to log data for postprocessing
- Configuring the receiver in real time
- Configuring the receiver using application files
- Creating and editing the configuration files that control the receiver
- AutoBase Feature
- Default Settings
- Specifications
- NMEA-0183 Output
- GSOF Messages
- Adding Internal Radio Frequencies
- Real-Time Data and Services
- Upgrading the Receiver Firmware
- Data Logging and Postprocessed Measurement Operations
- Troubleshooting
- Glossary
SPSx80 and SPSx81 Smart GPS Antennas User Guide 77
Specifications 9
Variable configuration options
This table lists the default options for each receiver type in the SPSx50 Modular GPS
receiver family.
This table lists the default options for each Smart GPS antenna in the SPSx81 Smart
GPS antenna family.
Configuration option SPS780 Basic base SPS780 Basic rover SPS780 Max SPS881 Extreme
CMR inputs (Rover)
8 9 9 9
CMR outputs (Base)
9 8 9 9
RTCM inputs (Rover)
8 9 9 9
RTCM outputs (DGPS Base)
9 8 9 9
10 Hz measurements
8 8 9 9
20 Hz measurements
8 8 8 9
Data logging (postprocessed)
8 8
Optional Optional
VRS capable
8 8 9 9
RTK range limit
8
2.4 km (1.5 miles) None None
GLONASS
8 8 8 9
L5
8 8 8 9
Configuration option SPS781 Basic base SPS781 Basic rover SPS781 Max SPS881 Extreme
CMR inputs (Rover)
8 9 9 9
CMR outputs (Base)
9 8 9 9
RTCM inputs (Rover)
8 9 9 9
RTCM outputs (DGPS Base)
9 8 9 9
10 Hz measurements
8 8 9 9
20 Hz measurements
8 8 8 9
Data logging (postprocessed)
8 8
Optional Optional
VRS capable
8 8 9 9
RTK range limit
8
2.4 km (1.5 miles) None None
GLONASS
8 8 8
Optional
L5
8 8
Optional