User's Manual
Table Of Contents
- USER GUIDE
- Legal Notices
- Safety Information
- Contents
- Introduction
- Features and Functions
- Batteries and Power
- Setup Guidelines
- Setting up the Receiver
- Configuring the Receiver Settings
- Using the SCS900 Site Controller software to configure the base station, the rover, and the radios
- Configuring the receiver to log data for postprocessing
- Configuring the receiver in real time
- Configuring the receiver using application files
- Creating and editing the configuration files that control the receiver
- AutoBase Feature
- Default Settings
- Specifications
- NMEA-0183 Output
- GSOF Messages
- Adding Internal Radio Frequencies
- Real-Time Data and Services
- Upgrading the Receiver Firmware
- Data Logging and Postprocessed Measurement Operations
- Troubleshooting
- Glossary
SPSx80 and SPSx81 Smart GPS Antennas User Guide 75
Specifications 9
GPS satellite signal tracking
This table shows the GPS satellite signal tracking capability for each Smart GPS
antenna in the SPSx80 Smart GPS antenna family.
This table shows the GPS satellite signal tracking capability for each Smart GPS
antenna in the SPSx81 Smart GPS antenna family.
GPS signal type Class SPS780 Basic SPS780 Max SPS880 Extreme
GPS signals L1/L2
9 9 9
L2C
8 8 9
L5
8 8 9
GLONASS signals
L1/L2
8 8 9
GPS SBAS corrections
WAAS
9 9 9
EGNOS
9 9 9
MSAS
9 9 9
GPS signal type Class SPS781 Basic SPS781 Max SPS881 Extreme
GPS signals L1/L2
9 9 9
L2C
9 9 9
L5
8 8
Optional
GLONASS signals
L1/L2
8 8
Optional
GPS SBAS corrections
WAAS
9 9 9
EGNOS
9 9 9
MSAS
9 9 9