User's Manual
Table Of Contents
- USER GUIDE
- Legal Notices
- Safety Information
- Contents
- Introduction
- Features and Functions
- Batteries and Power
- Setup Guidelines
- Setting up the Receiver
- Configuring the Receiver Settings
- Using the SCS900 Site Controller software to configure the base station, the rover, and the radios
- Configuring the receiver to log data for postprocessing
- Configuring the receiver in real time
- Configuring the receiver using application files
- Creating and editing the configuration files that control the receiver
- AutoBase Feature
- Default Settings
- Specifications
- NMEA-0183 Output
- GSOF Messages
- Adding Internal Radio Frequencies
- Real-Time Data and Services
- Upgrading the Receiver Firmware
- Data Logging and Postprocessed Measurement Operations
- Troubleshooting
- Glossary
D Real-Time Data and Services
114 SPSx50 and SPSx51 Modular GPS Receivers User Guide
RT17 Streamed Data service
An RT17 service provides GPS observations, ephemerides, and other information, as
defined for that service. When a “client” connects to the service, all data flow is from
the Smart GPS antenna to the client.
Login authentication
If you interface to the receivers using binary commands over serial communications,
you may need login authentication. This has been added to most SPSx51 and SPSx81
receiver models that run firmware version 3.30 or later.
If your utilities such as the WinFlash utility or the Configuration ToolBox software do
not work with the receivers running firmware version 3.30 or later, then go to the
Trimble website and download the latest versions of these utilities. If your own
application software no longer communicates with the receiver, please contact
Trimble Support for information about how to use the receiver in these cases.