User Manual

3 Configuration and Installation
16 SNB900 Radio Modem User Guide
4. To update the configuration, click Set. When the status dialog
confirms that the configuration is complete, return to the main
menu or exit WinFlash.
Click the
RadioInfo button to view a text list of all radio information,
including the current configuration settings.
B
Tip – You can print or save to file the radio configuration information for
future reference, or to send to Trimble Support to aid in troubleshooting
radio problems.
30.1 Firmware updates
SNB900 firmware upgrades are periodically available from the
Trimble website (www.trimble.com). The radio firmware can also be
upgraded using WinFlash.
3.1 Installation
Before setting up the equipment in the field, verify that each radio
modem is set to the same network.
Note – High-power signals from a nearby radio station or radar
transmitter can overwhelm the radio modem circuits. This does not
harm the instrument, but can prevent it from functioning correctly. To
avoid problems, try not to use the radio modem within 400 meters
(1300 feet) of powerful radar, television, or other transmitters.
Low-power transmitters, such as those in portable phones and
walkie-talkies, do not normally interfere with SNB900 operation.