User Manual

SNB900 Radio Modem User Guide 15
Configuration and Installation 3
4. Confirm your selected operation and click Finish. A connection
status window appears, and counts to 100%, and then displays
the SNB900 Configuration dialog:
Use the SNB900 Configuration dialog to modify configuration
settings:
1. In the Mode field, select the appropriate operating mode
depending on intended use. For example, Base with No
Repeaters.
2. In the Data Port group select the Baud Rate and Parity. This is
the setting for communications between the receiver and radio.
Note – The default GPS Port settings for the SNB900 is 38400
baud rate with None parity. The default Mode setting is Base
with No Repeaters.
3. In the Wireless Settings group, select the current network.
Note – All radios in the network must be configured with the
same network, or the radios will not communicate.