User Manual

Index
206 5700/5800 GPS Receiver User Guide
A
accuracy
centimeter-level 17, 123
submeter-level 17, 123
Actual Track Made Good Over and Speed
Over Ground message 194
adding frequencies for internal radio 85, 161
ANT port 24, 202
antenna information, default 96, 171
antenna power adapter 43, 107
Antenna record, in application file 63, 147
antennas
electrical interference 26, 131
mounting 26, 131
RPA 36
rubber duck 30, 36
using with 5700 receiver 43, 107
whip 30, 36
Zephyr 31
Zephyr Geodetic 31
application files 63–68, 76, 146, 147–151
applying 68, 150
configuring receiver with 147
configuring the receiver with 147
Current (Current.cfg) 65, 94, 149,
170
Default (Default.cfg) 64, 94, 148, 170
deleting 49, 139
deleting by formatting CompactFlash
card 55
editing in Configuration Toolbox
software 80, 156
maximum number 64, 148
naming 68, 151
overview 63, 147
Power Up (Power_Up.cfg) 65, 94,
149, 170
records 63, 147
storing 68, 150
timed 50, 66, 100
using to configure 1PPS output 117
applying application files 68, 150
ASCII output, default settings 95, 171
ASCII time tags
default 95
definition 115
B
backpack setup 36
base station. See reference station
batteries
camcorder 41
charging in reference and rover
receiver at the same time 57
charging while in 5700 receiver 56
charging with TSCe/TSC1
batteries 58
minimum power to charge 57
operating time 55, 90, 166
standby 52
battery compartments 25, 130
catches 22
Battery LEDs 52
battery, inserting in the 5800 receiver 131
baud rate
default 95, 171
maximum 92, 168
binary output, default settings 95, 171
blue RPA cable 24, 202
blue TNC port 24, 202
Bluetooth 122, 168
bottom panel 25, 130
bracket
receiver 32, 33
RPA 30
bracket insert 32
breakout box, on event marker/1PPS
cable 105
buttons 21, 49, 128, 139