User Manual
Table Of Contents
- 5700/5800 GPS Receiver
- Contents
- About This Manual
- 5700 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- 5800 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- 5700 & 5800 Appendixes
- NMEA-0183 Output
- Troubleshooting
- Index
13 General Operation
140 5800 GPS Receiver User Guide
55800 Operation
13.3.1 LED Flash Patterns
The following table details the possible flash patterns to indicate
various states of receiver operation.
Note – If a column shows “N/A”, that specific LED may or may not be
on, but it is not relevant to that particular Mode.
13.4Starting and Stopping the Receiver
To turn on the receiver, press .
To turn off the receiver, hold down for two seconds.
Receiver Mode Power LED
Green
Radio Led
Green
Satellite Led
Amber
Receiver OFF OFF OFF OFF
Receiver ON,
Healthy power
ON N/A N/A
Low Power Fast Flash
Tracking <4 SVs ON N/A Fast Flash
Tracking >4 SVs ON N/A Slow Flash
Receiving valid data
packets
ON Slow Flash N/A
No data packets ON OFF N/A
Receiver in Monitor ON Slow Flash ON