User Manual

12 Setting up the Receiver
132 5800 GPS Receiver User Guide
55800 Operation
12.4Pole-Mounted Setup
Figure 12.3 shows the pole-mounted setup for the 5800 receiver. To
mount the 5800 receiver on a range pole:
1. Thread the unit onto the range pole
2. Attach the data collector bracket to the pole
3. Insert the data collector into the bracket.
4. If using the TSC1, connect the data-i/o cable from Port 1 of the
receiver to a port on the TSC1.
If using the the Trimble ACU or TSCe with Bluecap module, no
cabling is required.
IMAGE OF COMPLETE 5800 ROVER
Figure 12.3 5800 receiver - pole-mounted setup