User Manual

5700/5800 GPS Receiver User Guide 117
Event Marker Input and 1PPS Output 10
55700 Reference
GPS Configurator sends the new configuration information to
the 5700 receiver, and the receiver starts to generate 1PPS
output on Port 2.
8. Click
OK to exit GPS Configurator.
The software disconnects from the 5700 receiver.
Using an application file
Configuration Toolbox lets you create an application file containing
the appropriate configuration instructions for 1PPS output. You can
then transfer that file to the 5700 to enable 1PPS output.
For more information, see Configuration Toolbox Software, page 80,
or refer to the Configuration Toolbox Help.
To create an application file for 1PPS output:
1. Connect the computer to the 5700 receiver.
2. Power on the 5700 receiver.
3. To start Configuration Toolbox, click , then select
Programs / Trimble / Configuration Toolbox / Configuration
Toolbox.
The main Configuration Toolbox window appears.
4. Select File / New / 5700 to display the Configuration File
dialog.
5. From the Available list, select Device, and then click
Add.
6. From the Device field, select 1 Pulse Per Second.