User Manual
Table Of Contents
- 5700/5800 GPS Receiver
- Contents
- About This Manual
- 5700 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- 5800 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- 5700 & 5800 Appendixes
- NMEA-0183 Output
- Troubleshooting
- Index
9 Cables and Connectors
104 5700/5800 GPS Receiver User Guide
55700 Reference
9.3 power/serial data Cable
Table 9.2 gives pinout information for the power/serial data cable
(PN 32345), which is supplied with the 5700 receiver.
Note – Table 9.2 assumes that the cable is attached to the connector
labeled Port 1 or Port 3.
Table 9.2 power/serial data cable pinouts
Lemo 0-shell
connector
7 Pin
Direction DE9-F connector
7 Cond
Power lead
2 Cond
Pin Function Pin Color Function Color Function
1 Signal ground
↔
5 Brown Signal ground
2GND
→
Black V-OUT
3TXD
→
2OrangeTXD
4RTS/TXD
→
8Blue RTS
5CTS/RXD
←
7GreenCTS
6PWR
←
Red Power IN (+)
7RXD
←
3 Yellow TXD