User Manual

1. Contacts—transfers grade-display signals between the hand-held
receiver and radio remote control.
2. Mounting Plate—connects to the back of a hand-held receiver so that
the radio remote control and hand-held receiver can transfer signals.
3. 12-ft (4-m) Cable—transfers signals between the radio remote control
and a hand-held receiver.
4. Clamp—connects to the radio remote control so signals can be
transferred between the hand-held receiver and radio remote control.
5. Mounting Guides—fit into the mounting channels on the back of a
hand-held receiver so that signals can be transferred between the radio
remote control and hand-held receiver.
Remote Holster
1. Mounting Slot—provides an opening for the radio remote control clip to
be slipped into.
2. Mounting Strap—allows the radio remote control to be connected to the
grade rod for automatic alignment functions. The holes in the strap
accommodate grade rods of varying sizes.
Battery Recharger
1. 4-Socket Plug w/ Retaining Collar—connects to the 4-pin receptacle on
the laser.
2. Grounded Receptacle—connects to a grounded electrical power cord.
External Power Cord
1. Alligator Clips (+ and -)—connect to the positive (+) and negative (-)
terminals on a 12 V dc battery.
2. 4-Socket Plug—connects to the 4-pin receptacle on the laser.
Quick-Disconnect Adapter
The quick-disconnect adapter allows you to quickly connect/disconnect the
laser from the tripod.
3 1/2-8 Adapter
The 3 1/2-8 adapter allows you to connect the laser, which has a 5/8-11
threaded mount, to a tripod or other mounting device that has a 3 1/2-8
threaded mount. The carrying case is designed to that the adapter can remain
attached to the laser while the laser is being stored in the case.
Steep-Grade Adapter