User Manual

Radio Remote Control Operating Messages

Operating Messages Meaning

Start/Wait Automatic alignment is started and in process

Standby The laser is on and in standby mode

∠ Grade Grade value for ∠ axis can be changed

Axis Align Automatic axis alignment can be selected

∠ Grade Bump (One-

Way Remote)

Grade value for ∠ axis can be changed in 0.01%

steps

∠ Grade Bump (One-

Way Remote)

Grade value for ∠ axis can be changed in 0.01%

steps

PlaneLok PlaneLok mode can be selected

Grade Match Grade match mode can be selected

Grade Reverse

Grade reverse for the ∠ axis can be selected

Reversing The sign (+/-) of the cross axis is changing

RPM Rotor speed can be changed

Success Messages Meaning

Axis Align Complete Completion of automatic axis alignment

Grade Match Complete Completion of automatic grade matching

PlaneLok Complete Completion of automatic PlaneLok

Grade Reverse Complete

Completion of grade reverse

300, 600, 900 Shows the selected rotation speed

Radio Remote Control Failure Messages

Failure

Messages

Meaning Possible Solution

Fail—No Receiver Searched for receiver

but couldn’t find it

• Move the grade to within

1.5% of the range needed

for the receiver to pickup

the beam

• Make sure the receiver is

not blocked from the laser

beam