User Manual

Receiver
Problem Solution
Receiver does not receive a laser
signal
• Make sure the laser receiver is on.
• Make sure the batteries have
sufficient power and are installed
correctly.
• Make sure the batteries contacts
are in proper working condition.
• Make sure the receiver is within
the operating range of the laser.
• Try receiving the laser beam with
another receiver. If the new
receiver detects the laser beam,
return the original receiver to an
authorized service center for
repair.
Receiver occasionally beeps when it
is not in the laser beam
• Make sure the receiver is not near
radar or high-frequency radio
stations.
• Make sure the laser beam is not
bouncing off a highly reflective
surface.
Radio Remote Control
Problem Solution
Radio remote control not receiving or
sending any signal
• Make sure the radio remote
control is on.
• Make sure the batteries have
sufficient power and are installed
correctly.
• Make sure the batteries contacts
are in proper working condition.
• Make sure you have a good
connection between the receiver
and radio remote control.
• Make sure the radio remote
control antenna is mounted