User Manual

Maintenance and Care
You will get years of service from the leveling system by following the
maintenance and care recommendations in this manual. Carry the laser in its
moisture-resistant, field-tested carrying case to safely move the laser from
one job to another.
However well the product is designed, mishaps do occur. The most common
problems associated with these are covered in the following areas.
Storage
CAUTION: Do not store the laser in a wet carrying case. If the case gets wet,
open it and let it dry before storing the laser.
CAUTION: Remove the batteries from the laser and receiver when storing
the equipment more than 30 days.
Battery Disposal
Some countries, states, and local areas have regulations regarding the
disposal of rechargeable batteries. Be sure that replaced batteries are
disposed of properly.
System Cleaning
Use only a good-quality glass cleaner and a soft cloth to clean all external
optical components. A dry cloth used on the laser’s/radio remote control’s
optical components or displays could scratch or damage these surfaces.
Blow off any loose debris before cleaning any surfaces to prevent scratching
of optical surfaces. Monthly, wipe off with a moist, clean cloth any dust or
dirt from the laser’s outer surface, inside the battery housing, and within the
leveling base. Clean all corroded battery contacts with a pencil eraser or
baking soda solution.