User Manual

Activating/Deactivating Standby Mode
Standby mode, which can only be activated by using a one-way or two-way
radio remote control, is a power-saving feature that conserves laser battery
life.
1. Quickly press and release the radio remote control’s power button again
to activate standby mode.
Note: When standby mode is activated, the laser beam, rotor, self-leveling
system, and LEDs shut down. So that you know that the laser is in standby
mode rather than being turned off, dashed lines appear in the laser’s LCD. In
the radio remote control’s LCD, the word “standby” appears.
2. To deactivate standby mode and restore full operation of the laser,
quickly press and release the radio remote control’s power button. The
laser and all other functions turn on again.