User Manual

2. To turn off the radio remote control, press and hold the power button for
3 seconds.
Selecting the Operational Mode
The mode button allows you to choose the laser’s operational mode, which
includes automatic axis alignment, grade matching, PlaneLok, grade bump,
grade reverse, manual, and beam rotation speed. A “hidden” button sequence
also allows you to calibrate the laser from the radio remote control (see the
“Calibration” section of this manual for more information.
1. Repeatedly press and release the mode button to cycle through the
operational mode menu. The menu selections appear in the radio remote
control’s LCD.
Confirming the Operational Mode
1. Press the mode button to select the operational mode appropriate for you
application needs.
2. Press the enter button to confirm your selection.
Activating/Deactivating the Backlighting Feature
1. Press and hold the enter button to activate backlighting.
Backlighting turns off automatically to save battery life.
Selecting the Rotation Speed
The laser has three laser beam rotation speeds—300, 600, and 900 rpm. The
rotation speed can be changed at any time to meet your job-site conditions.
Use 600 rpm for held-held receivers and most machine-control systems.
1. Select “Rotation Speed” from the operational mode menu using the
mode button.
2. Repeatedly press and release the radio remote control’s up or down
button until the desired rotation speed has been selected.
Note: The rotation speed appears in the two-way radio remote control’s
LCD. If you are using a one-way remote control, you must look at the laser’s
LCD for this information.