User Manual

beyond its built-in sloping capability so you can perform steep-sloping
horizontal applications.
1. Make sure the laser is on and in the orientation appropriate for your
application needs (horizontal or vertical).
2. Press the manual mode button.
Note: When manual mode is activated, the status LED flashes red once per
second and scrolling horizontal segments appear in the LCD.
3. To resume automatic self-leveling mode, press the manual button again.
Rotating the Axis Alignment Manually
The axes-alignment buttons allow you to electronically rotate the laser so that
the grade of the laser beam properly aligns to the job-site grade.
1. To make coarse adjustments, look through the sighting guides on top of
the laser and turn the laser on the tripod until it is properly aligned.
2. To make fine adjustments, press and hold the axis-alignment button that
corresponds to the direction you want to rotate the laser’s axis until the
desired rotation has been reached.
Note: A vertical line in the LCD moves to the left or right to give you a rough
indication of the rotation position.