Operation Manual

SiteNet 450 Operation Manual 27
Installing the SiteNet 450 Network 3
3.4.2 Infrastructure/Base Station Power and I/O Cable
The cable shown in Figure 3.6 is used for base station and repeater
installations of SiteNet 450s. Cables come in the lengths shown in
Table 3.4.
Table 3.4 Available cable lengths
Note – Nearly all installations of infrastructure radios will require
either a 7.5 m (25 ft) or a 30 m (99 ft) length.
Seal unused connectors by covering them with plastic tape.
Figure 3.6 Radio power and I/O cable (PN 38968-25)
Part number Cable length
38968-25 7.5 m (25 ft)
40942-03 1 m (3 ft)
40942-40 12 m (40 ft)
40942-99 30 m (99 ft)
8-pin Bendix to SiteNet 450
DB-9 to PC for data
or configuration
Conxall to
MS750
TA-3 power
SN450.book Page 27 Friday, October 5, 2001 5:01 PM