Operation Manual

3 Installing the SiteNet 450 Network
26 SiteNet 450 Operation Manual
3.4.1 Power and I/O Cable for Machine Installations
The cable shown in Figure 3.5 connects the SiteNet 450 to either the
MS850™ or the MS860™ GPS receiver on the machine. The GPS
receiver outputs power to the SiteNet 450 through this cable.
The straight connector attaches to the bottom cap of the SiteNet 450,
and the angled connector attaches to the 8-pin Bendix connector of the
GPS receiver.
Figure 3.5 Power and I/O cable (PN 32942-17)
SN450.book Page 26 Friday, October 5, 2001 5:01 PM