Operation Manual

SiteNet 450 Operation Manual 25
Installing the SiteNet 450 Network 3
3.4 Cabling Configurations
The SiteNet 450 is typically configured as a rover, but the cables and
adapters necessary for other configurations are also available.
Table 3.3 summarizes the cabling items available or provided with the
SiteNet 450 unit or available accessories.
Table 3.3 SiteNet 450 cabling and power accessories
Item Part number
Power and I/O cable for machine installations, 5 m (17 ft)
8-pin female Bendix connector on each end
32942-17
Infrastructure/Base Station power and I/O cable, 7.5 m (25 ft)
8-pin female Bendix, with Y-split to TA-3 power connector,
DBF-9, plus 12-pin Conxall
38968-25
Machine service cable (21-pin female Bendix, with Y-split to
bare power leads and dual DBF-9 connector)
36938
DC power adapter cable with TA-3 connector and battery
clips
44087-00
SiteNet Base Station/Configuration cable, 30 m (99 ft) 40942-99
SN450.book Page 25 Friday, October 5, 2001 5:01 PM