Operation Manual

2 Configuring the SiteNet 450
10 SiteNet 450 Operation Manual
When a successful connection is established, the SiteNet 450
Configuration window replaces the WinFLASH window:
2.3.3 Configuring the SiteNet 450
To configure the SiteNet 450:
1. Select the appropriate operating Mode depending on intended
use, for example Rover.
2. Select the Channel Sharing configuration (base modes only, not
selectable for a repeater or rover). The options are:
– Off: The carrier detect mode is OFF. The SiteNet 450 will
ignore other transmissions on your frequency and continue
to transmit data.
SN450.book Page 10 Friday, October 5, 2001 5:01 PM