Operation Manual

SiteNet 450 Operation Manual 7
Configuring the SiteNet 450 2
2.3.1 Connecting to the SiteNet 450
1. Connect a SiteNet 450 service cable to the SiteNet 450.
2. Connect the I/O DB-9 connector of the service cable to a serial
port on your PC.
Note – Figure 3.7 on page 28 shows an infrastructure cable
(PN 38968-25) connected to the SiteNet 450. Figure 3.10 on
page 31 shows the service cable (PN 40942-xx) connected to
the SiteNet 450 and a PC.
3. Provide power to the radio through the power lead of the service
cable.
2.3.2 Starting WinFLASH
1. To start WinFLASH, click the WinFLASH icon. The
WinFLASH main window appears:
2. Follow the directions in the WinFLASH window to connect the
radio-modem to the PC.
SN450.book Page 7 Friday, October 5, 2001 5:01 PM