User's Manual Part 1

TDL 450i Intergrator’s Guide 12
Parameter Default
Link Rate 9600 bps GMSK
EOT 50 ms
Repeater Delay 0
CSMA On*
FEC On
Scrambling On
Sensitivity High
Local Address 0
Destination Address 255
*CSMA is required to be on only inside the United States. You should turn CSMA off in EU countries.
TDL 450i Factory Default Settings
Up to 32 frequencies are stored in the configuration memory called the channel table. The selection of
channel is subject to proper licensing of the corresponding frequencies by the appropriate governmental
agency. Please refer to the XDLCONF User’s Guide for instructions in creating and uploading channel tables
into the TDL 450i transceiver modem.
The TDL 450i transceiver modem supports multiple protocols and modes of operation including:•
• Transparent with EOT Timeout
• Transparent with EOT Character
• TRIMTALK™ 450S
• TRIMTALK II/IIE
• TT450S (HW)
• TRIMMARK™ 3
• SATEL®
• Transparent FST
Refer to the XDLCONF User’s Guide for a detailed description.