User's Manual

1 AbouttheKenaitabletcomputer



1. Looponeendofthetethertothestyluseyelet.

2. Looptheotherendofthetethertothetabletcomputereyelet.
3.Pushthestylusonthestylusholderuntilitlocksintoplace.
Toremovethestylus,liftthestylusbyitstabtoremo veitfromthestylusholder .For
convenienceofuse,pullthetabtoextendthestyluslength.
InsertingaSIMcard
Ifyourtabletcomputersupportsdataconnectionusing3GSIMcards,itincludesamicroSIM
cardslotforcellularandwirelessconnection.OnlyamicroSIMcardissupportedintheslot.
ToinsertaSIMcard:
1. Make sure thetablet computer is turn ed off. Remove the battery and locate the SIM card
slotinsidethebatterycompartment.

2. OpentheSIMcardslotcover.

3. AligntheSIMcardwiththeslotmakingsurethatthecornersmatch.

4. InsertthemicroSIMcardandpressitinuntilitclicks.

5. ClosetheSIMcardslotcover,andreplacethebattery.Lockthebatterycompartment.
TrimbleKenaiTabletComputerUserGuide10