User's Manual

Index
192 Trimble R7/R8 GPS Receiver User Guide
applying application files 57, 132
ASCII
output, default settings 81, 153
time tags, default 80
time tags, definition 98
B
backpack setup 28
base station See reference station
baseline, moving 164
batteries
camcorder 32
charging in reference and rover
receiver at the same time 47
charging while in Trimble R7
receiver 45
charging with TSCe batteries 48
minimum power to charge 46
operating time 44, 76, 146
standby 41
battery
compartments 13, 16, 111
inserting in the Trimble R8
receiver 112
LEDs 41
baud rate
default 80, 81, 152
maximum 78, 148
binary output, default settings 81, 153
blue RPA cable 16, 190
blue TNC port 16, 190
Bluetooth 3
bottom panel 16, 111
bracket
insert 24
receiver 24, 25
RPA 22
breakout box, on event marker/1PPS
cable 91
buttons 12, 38, 108, 118
C
cables
coaxial 93
data/power 61, 90, 158
event marker/1PPS 90
GPS antenna 16, 98
RPA 16
camcorder batteries 32
catch
for battery compartment 13
for CompactFlash/USB door 12, 108
cellphones 33, 115
cellular modems 33, 115, 190
centimeter-level accuracy 8, 104
charging
internal batteries 45
minimum time required 46
Trimble R7 and TSCe batteries 48
CMR
input 9, 105
output 9, 105
output, default settings 81
coaxial cable, for connecting to GPS
antenna 93
COCOM limits 10, 106
cold start, time required 77, 147
color-coded TNC ports 16
CompactFlash card
corrupted 188
formatting 39, 44, 188
full 42
logging data to 42
transferring files from 63
Type I 36
upgrading receiver firmware from 50,
125
CompactFlash port 16, 17, 111