User's Manual
Table Of Contents
- Safety Information
- Introduction
- Trimble R7 GPS Receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- Trimble R8 GPS Receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Appendixes Trimble R7 / Trimble R8
- NMEA-0183 Output
- RTCM Output
- Troubleshooting
- Index
17 Specifications
146 Trimble R7/R8 GPS Receiver User Guide
Trimble R8 GPS Receiver Operation
This chapter details the specifications of the Trimble R8 receiver.
17.1Physical Specifications
Table 17.1 lists physical specifications for the Trimble R8 receiver.
Table 17.1 Physical specifications
Feature Specification
Size 19cm (7.5") wide x 10cm (3.9") deep
including connectors
Weight: with internal battery
and radio
1.31 kg (2.13 lbs)
Operating times on internal
battery
450 MHz receive/transmit: 3.5 hours (varies
with temperature and wireless data rate)
GSM: 3.8 hours (varies with temperature)
Battery life
(at 20 °C)
Approximately 5.5 hours for one 2.0 ah
Lithium-ion battery
External Power input 11–28 V DC
Operating temperature
a
a
Receiver will operate normally to –40 °C. Bluetooth module, GSM module, and
internal batteries are rated to –20 °C.
–40 °C to +65 °C (–40 °F to +149 °F)
Storage temperature –40 °C to +70 °C (–40 °F to +157 °F)
Humidity 100% condensing, unit fully sealed
Casing Dust-proof, shock- and vibration-resistant