User's Manual
Table Of Contents
- Safety Information
- Introduction
- Trimble R7 GPS Receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- Trimble R8 GPS Receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Appendixes Trimble R7 / Trimble R8
- NMEA-0183 Output
- RTCM Output
- Troubleshooting
- Index
Trimble R7/R8 GPS Receiver User Guide 125
General Operation 14
Trimble R8 GPS Receiver Operation
146.3 Firmware
A receiver’s firmware is the program inside the receiver that controls
receiver operations and hardware. You can upgrade the firmware for
the Trimble R8 receiver using the WinFlash software provided on the
Trimble R7, Trimble R8, 5700, and 5800 GPS Receivers CD.
For more information, see The WinFlash Software, page 135.
C
WARNING – Upgrading the firmware deletes all application files on the
receiver.