User's Manual

Trimble R7/R8 GPS Receiver User Guide 113
Setting up the Receiver 13
Trimble R8 GPS Receiver Operation
Figure 13.3 Trimble R8 receiver pole-mounted setup
13.1Other System Components
This section describes optional components that you can use with the
Trimble R8 receiver.
131.1 Radios
Radios are the most common data link for Real-Time Kinematic (RTK)
surveying. The Trimble R8 is available with an optional internal radio in
the 450 or 900 MHz UHF band, or with an internal GSM module. You
can also connect an external radio to either port, whether or not the
internal radio is installed.
The Trimble R8 receiver supports the following Trimble base radios
with the internal 450 MHz or 900 MHz UHF radios:
• TRIMMARK™ 3
F
F
Trimble R8 GPS Receiver
ACU controller